AquaStandard
AquaStandard
CALIBRATION-CONDUCTIVITY
4.0(12 reviews)
1413 µS/cm and 12.88 mS/cm conductivity standards for meter calibration.
- • Measurement range: N/A (standard values: 1413 µS/cm and 12.88 mS/cm)
- • Accuracy: ±1% (NIST-traceable)
- • Calibration: N/A (this IS the calibration standard)
- • IP rating: N/A (sealed bottles)
Affiliate Link
This page contains Amazon affiliate links. We earn a commission at no extra cost to you. See our full disclosure.
Full Specification Sheet
| Spec Name | Spec Value |
|---|---|
| Measurement Range | N/A (standard values: 1413 µS/cm and 12.88 mS/cm) |
| Accuracy | ±1% (NIST-traceable) |
| Calibration Method | N/A (this IS the calibration standard) |
| Probe Type | N/A |
| IP Rating | N/A (sealed bottles) |
| Suitable Water Types | Freshwater, Saltwater, Brackish |
| Maintenance Notes | Discard after expiry; store at room temperature. |
Pros & Cons
What We Like
- NIST-traceable standards
- Covers both low and high conductivity ranges
- Good shelf life (18 months sealed)
Considerations
- Expires 3 months after opening
- Must equilibrate to sample temperature before use
- Bottles are non-refillable
Who Is This Product For?
1413 µS/cm and 12.88 mS/cm conductivity standards for meter calibration.
- Freshwater
- Saltwater
- Brackish
Maintenance Requirements
Discard after expiry; store at room temperature.
Alternative Products
| Check Price | ||||||
|---|---|---|---|---|---|---|
| CALIBRATION-PH-BUFFERS | N/A (standard values: pH 4.01, 7.00, 10.01) | N/A (this IS the calibration standard) | N/A | N/A (sealed bottles) | $ | Check Price |
| CALIBRATION-DO-STANDARD | N/A (0 mg/L and 100% saturation standards) | N/A (this IS the calibration standard) | N/A | N/A (sealed sachets) | $ | Check Price |
Safety & Electrical Warnings
This device contains electrical components and is intended for use near water. Always follow manufacturer safety guidelines.
- Never use damaged probes.
- Keep charging ports dry.
- Do not immerse beyond rated IP depth.
- Dispose of batteries responsibly.
- Consult a qualified technician if unsure.
Related Products
AquaStandard
CALIBRATION-PH-BUFFERS
pH 4.01, 7.00, and 10.01 buffer solutions for 2- and 3-point calibration.
±0.01 pH (NIST-traceable)N/A
Budget
4.3
AquaStandard
CALIBRATION-DO-STANDARD
Zero-oxygen and air-saturation standards for DO meter calibration.
±0.01 mg/LN/A
Budget
4.1